中心波长1064nm，带宽±5nm，峰值隔离度32dB，隔离度23℃ 28dB，透过率@23℃>92%，回波损耗(Input/Output) 50dB，偏振相关损耗0.2dB，平均功率100W，峰值功率30kW。
隔离反射光：500W高功率隔离器利用磁光晶体的法拉第效应来隔离反射光，只允许光以单一方向传输。这种单向传输的特性可以防止光源受到由背向反射或信号产生的不良影响。
保护激光器：背向反射可能损坏激光器或者使之产生跳模、振幅变化或频移。在高功率应用中，背向反射还能引起不稳定性和功率尖峰。
提高系统稳定性：通过隔离反向传输的光，光隔离器可以防止反射光影响系统的稳定性，类似于电子器件中的二极管功能
这些产品广泛应用于高功率激光焊接，激光清洗，激光3D打印等领域，具有低插损、高隔离度和高承载功率等特点，能够满足高功率激光应用的需求。
特点: |
应用: |
|
|
| 参数指标 | 单位 | 规格 | ||
| 最小值 | 典型值 | 最大值 | ||
| Central Wavelength | nm | - | 1064 | - |
| Isolation(@23℃) | dB | 28 |
- | - |
| Transmission(at 23 ℃,λc) | % | 92 | - | - |
| Transmission(at 632.8nm) | % | 20 | ||
| M2 degradation | % | 12 | ||
| Thermal lens offset | mm | 3 | ||
| Return Loss | dB | 50 | - | - |
| Output Beam Diameter(4Sigma) | mm | 6.5 | 7.0 | 7.5 |
| Cooling Mode | - | Water-cooled | ||
| Ellipticity | % | 90 | - | - |
| Armed Cable Length | m | - | 4 | - |
| Armed Cable Diameter | mm |
- |
10(black) | - |
| Fiber Length | m | 5 | - | - |
| Fiber Type | - | Nufern, LMA-GDF-30/250 | ||
| Fiber NA | - | 0.06 | 0.065 | 0.07 |
| Operating Average Power | W | - | 1000 | - |
| Operating Peak Power | kW | - | 30 | - |
| Operating Temperature | ℃ | 0 | - | 40 |
| Storage Temperature | ℃ | -20 | - | 60 |
SPM - Solid-state Photodetector Module to retrofit PMT, higher sensitivity and reliability, lower cost.
Various Powers Options High Isolation Low Insertion Loss Ultra-compact Size Low Cost
High Precision Optical Reflecting Deflecting Displacement Rotation and Dispersion Prisms are choosen by Microscopes, Optical Instruments, Binoculars, Telescopes, Periscopes, Surveyring equipements and many sophisticated Scientific Instruments including Interferometers, Spectrophotometers and Fluorimeters.
Ultra-compact Size Long-distance Rangefinder 15KM Eye-safe Low Cost
支持 IPv6 网络
中文
English
Deutsch
日本語
